Dòng JCO-6000-ORN-A là máy tính công nghiệp AI siêu bền, thiết kế không quạt, được trang bị NVIDIA Jetson AGX Orin (hiệu suất 275 TOPS). Thiết bị hỗ trợ kết nối tối đa 8 camera GMSL2 và tích hợp tối đa 2 mô-đun EDGEBoost I/O cho các giao diện USB3, PoE và camera GigE Vision. Máy tính Edge AI này cũng hỗ trợ quản lý từ xa thông qua mô-đun OOB.
C&T Solution cung cấp các giải pháp Edge Computing hiệu quả, mang lại hiệu suất ổn định ngay cả trong những môi trường công nghiệp khắc nghiệt. Dòng máy tính Rugged-Edge chủ lực của C&T Solution đã đạt chứng nhận UL Listed và được kiểm nghiệm, xác thực nghiêm ngặt để đáp ứng các tiêu chuẩn an toàn: UL Listed (đang chờ phê duyệt), FCC/CE, E-Mark, EMC-Conformity bao gồm EN 50155. Quy trình thử nghiệm theo CB Scheme.
| System | |
|---|---|
| Processor | • 64 GB, 12-core Arm® Cortex®-A78AE v8.2 64-bit CPU (60W/275 TOPS) • 32 GB, 8-core Arm® Cortex®-A78AE v8.2 64-bit CPU (40W/200 TOPS) |
| LAN Chipset | GbE1: Marvell 88e1512 (right) 10 GbE2: Marvell AQC113(left) |
| System Memory | AGX Orin 32 GB/64 GB LPDDR5 @ 3200 MHz on SOM |
| TPM | TPM 2.0 |
| Display | |
|---|---|
| HDMI | 1x HDMI, 3840 x 2160 @ 60Hz |
| Storage | |
|---|---|
| eMMC | 1x eMMC 5.1, 64 GB |
| M.2 | 1x M.2 (M Key, 2280, PCIe x4, Support NVMe) (Default 128GB) |
| SD | 1x Micro SD Socket |
| SIM Socket | 2x Micro SIM Socket (M.2 B Key attached) |
| Expansion | |
|---|---|
| M.2 | 1x M.2 (B Key, 3042/3052, USB 3.2 Gen 2, Support 4G/5G Module) 1x M.2 (E Key, 2230, PCIe x1, USB 2.0, Support Wi-Fi/Bluetooth) |
| Expansion Modules Support EDGEBoost I/O Modules: • 4x GbE module with Intel® I350 Chipset, RJ45/M12 connector (PoE optional) • 2x RJ45 10GbE with Intel X710 Chipset • 4x USB 3.0 Locking Type with 2x screw hole • 4x USB 3.0 (share PCIe Gen2 x1 bandwidth) • 1x M.2 M Key, PCIe x4 Lane, 2242/2260 for NVMe Storage *The left EBIO Bracket on the front panel don’t support PoE Module |
|
| Operating System | |
|---|---|
| Linux | Linux Ubuntu 22.04 with JetPack 6.2 |
| I/O | |
|---|---|
| CAN | 2x CAN 2.0 B |
| COM | 2x RS-232/422/485 (Switch by MCU) |
| DIO | 8 in / 8 out (Isolated) |
| EDGEBoost I/O Bracket | 2x EDGEBoost I/O Bracket |
| GMSL Camera | GMSL 2 Camera Support by 2x Quad Port Mini Fakra, supporting 8x 1280×720 @ 30 FPS (Optional) |
| LAN | 2x RJ45 |
| OOB | 1x RJ45 (OOB Management Module, Optional, Occupied 1x EBIO Bracket and 1x COM & 1x USB Type-C Console Port) |
| PoE | By Optional PoE Power Module, Support up to 4x RJ45/M12 LAN Module |
| USB | 1x USB 3.2 Gen 2 (10 Gbps) 1x USB Type C (Console) 1x USB 2.0 (OS Flash) |
| LED | LED 1 : System Status (Blue) LED 2 : Programmable LED (Blue) LED 3 : Programmable LED (Blue) LED 4 : Programmable LED (Blue) LED 5 : Programmable LED (Blue) LED 6 : Programmable LED (Red) |
| Others | 6x Antenna Holes 1x Power Switch, 1x Reset Switch, 1x Force Recovery Switch 1x AT/ATX Switch, 1x Remote Power On/Off 1x PC/CAR Mode Switch |
| Power | |
|---|---|
| Power Adapter | Optional AC/DC 24V/5A, 120W Optional AC/DC 24V/9.2A, 220W Optional AC/DC 24V/11.67V, 280W |
| Power Mode | AT, ATX |
| Power Ignition Sensing | Adjustable Power Ignition Management |
| Power Supply Voltage | DC IN 9~48V DC IN 48~110V, Optional (occupied 1x EBIO Bracket) 12V: PoE Power Budget Supports Up to 40~60W 24V: PoE Power Budget Supports Up to 120W |
| Power Connector | 3-pin Terminal Block |
| Power Protection | OVP (Over Voltage Protection); OCP (Over Current Protection) Reverse Protection |
| Environment | |
|---|---|
| Operating Temperature | -20°C to 55°C (AGX 64G, MaxN Mode at 68 Watt, Non-Throttling) -20°C to 50°C (AGX 64G, MaxN Mode at 68 Watt, Non-Throttling, With PoE/10G/4U3V Module, full CPU+GPU stressing) with 0.6 m/s airflow |
| Storage Temperature | -40°C to 85°C |
| Relative Humidity | 10% to 95% (non-condensing) |
| Certification | CE, FCC Class A, UL 62368-1 , E-Mark, EMC Conformity with EN50155 & EN50121-3-2 |
| Vibration | IEC60068-2-64:2008 With SSD: 5 Grms (5 – 500 Hz, 0.5 hr/axis) Designed to comply with MIL-STD-810G Method 514.7 Procedure I |
| Shock | IEC60068-2-27:2008 With SSD: 50G half-sin 11ms Designed to comply with MIL-STD-810G Method 516.7 Procedure I Package Drop Test: ISTA 2A |
| Physical | |
|---|---|
| Construction | 270 (W) x 190 (D) x 95 (H) mm |
| Weights | 6 ~ 7 kg |
| Construction | Extruded Aluminum with Heavy Duty Metal |
| Mounting Options | Wall Mounting |
- All product specifications and information are subject to change without notice.
Đánh giá
Chưa có đánh giá nào.